Spectrum Security Products - Equipment & Accessories


Class II Isolation Transformer

Code: PA1647


16 volt 50 VA transformer with lightning protection.


SPECIFICATIONS

Input Voltage 195-265 Vac
Input Frequency 50Hz
Input Current Limiting 0.5A
Output Voltage 16VAC±5%
Output Current 3.125A
Total Power 50W
Efficiency >=70%
Short Circuit Protection Automatic recovery
Temperature Operating Ambient 0-+40C
Temperature Non-operating Ambient -20-+75C
Humidity Operating 20%~85%relative humidity (Non-condensing)
Humidity Non-operating 10%~90% relative humidity (Non-condensing)


Class II Isolation Transformer

Code: PA16468


16 volt 20 VA transformer with lightning protection.


SPECIFICATIONS

  • Input: 230vac / 50Hz
  • Output: 16,5 volt AC / 1.21-Amp max – 20 va
  • Certifications:
    IEC 61558-1:2005
    IEC 61558-1:2005/AMD1:2009
    IEC 61558-2-6:2006


Low Battery Cut Out Switch

Code: PA1750


Low Battery Cut Out Switch on 10.5 Volts
Radio Input Connection


SPECIFICATIONS

  • Supplied with lugs to plug directly onto battery
  • 5mm PCB connectors for charger wiring
  • Automatically cuts power when battery voltage falls to 10.5 volts, thereby preventing battery from discahrging completely
  • Automatically restores power to battery when charger voltage is re-applied
  • LED indication of how battery status, on when battery ok
  • Current rating 10A @ 12VDC
  • Physical size: 57mm x 36mm


Pepper Gas Unit

Code: PA1825
Cannister Code: PA1830


Must be used in conjunction with the Burglar-Spray Unit or ANY Existing Alarm System with a spare programmable output that can be programmed to activate on an alarm condition for ± 3 - 8 seconds depending on the area to be volumized.


FEATURES:

  • 100ml OC Gas Canister with 'Non-flammable' propellant
  • 100ml Training Gas Canister
  • 7Ah Battery
  • Ps 817 Charger Board
  • 50VA 16AC TRANSFORMER
  • Slave discharge mechanism
  • Pre-set timer board (3 seconds)
  • Fused to protect against overload
  • Box size: 298W x 285H x 76D

SPRAY SPECIFICATIONS:

  • Operating Voltage: 11.8V - 13.8V DC
  • Operating Temperature: +5ºC ~ +50ºC
  • Current Drain: 5A for ±700ms, diminishing to 2A
  • Maximum Spray time: 15 seconds/cycle
  • Recommended Spray time: 3-8 seconds
  • Program Panel Siren Time: 2 Minute Duration
  • Time to Empty Canister: ± 15 seconds





LED Lights

Red LED Small Code: PA1536
Red LED Large Code: PA1536L
Blue LED Small Code: PA1537
Blue LED Large Code: PA1537L
Green LED Small Code: PA1538
Green LED Large Code: PA1538L
LED Holder Small Code: PA1539
LED Holder Large Code: PA1539L




  GO BACK



Photo-Electric Smoke Detector

Code: PA1045H


The Photo-Electric smoke detector offers a unique design and is easy to install.


FEATURES:

  • Operating voltage 12volt dc
  • Sensor type: infrared photoelectric diode
  • Standby current 5mA
  • Alarm current 35mA
  • Operating temperature: 10°c - +50°c
  • Dimensions 112mm x 41mm
  • Ceiling mounted
  • Reset and test button
  • Relay output: n/open & n/close
  • Led indication every 10 seconds



Siren & Strobe Light Combination

Code: PA1420H


The siren and strobe light work together to alert you to an intruder.


FEATURES:

  • Rated voltage 12volt dc
  • Working voltage 9-15volts
  • Current draw 100-180mA
  • Continues working time 1 hour at 12volt
  • Db level 100 db/m



15Watt Siren

Code: PA1520H


The siren works together with the strobe light to alert you to an intruder.


FEATURES:

  • Rated voltage 12Volts dc
  • Working voltage 9 – 15 volts
  • Current draw 600 mA
  • Continues working time 1 hour at 12volt dc
  • Db level 105db/m
  • 1 tone
  • Wall mount



30Watt Siren

Code: PA1523I


The siren works together with the strobe light to alert you to an intruder.


FEATURES:

  • Rated voltage 12Volts dc
  • Working voltage 9 – 15 volts
  • Current draw 14000 mA
  • Continues working time 1 hour at 12volt dc
  • Db level 110db/m
  • Wall mount



Strobe Light

Small Code: PA1500H
Large Code: PA1501


The strobe light works together with the siren to alert you to an intruder.


FEATURES:

  • Rated voltage 12volt dc
  • Working voltage 9-15 volt dc
  • Material used BASE: ABS
  • Material used LENS: ACRYLIC /POLYCARBONATE
  • LENS: RED
  • Current draw 150 – 220mA
  • Continues working time 1 hour at 12volt dc
  • Flashing times 150 per minute



  GO BACK



Emergency Panic Button

Code: PA1530C


FEATURES:

  • Easy to Operate
  • Easy Installation
  • Stable Performance



Magnetic Contacts

White Code: PA1575
Brown Code: PA1576


FEATURES:

  • Compact Design
  • Easy Installation
  • Shock Proof Function
  • Available in White and Light Brown



Roller Shutter Magnetic Contacts

Code: PA1727H


FEATURES:

  • Compact Design
  • Easy Installation
  • Shock Proof Function



Piezo Siren

Code: PA1540H


FEATURES:

  • 9-15 Volt DC
  • 30Ma
  • 93Db/m





  GO BACK


Spectrum Security Products - Locks & Brackets


KEYTEK Electromagnetic Lock 280kg

Code: PA4700


FEATURES:

  • Suitable for wooden, glass, metal and fire proof doors
  • LED indicates door status
  • Armature plate size: 180 (L) X 38 (W) X 11 (H)
  • Holding force: 280kgs
  • Voltage: 12 / 24 V DC ± 10%
  • Current draw:
    12V/500mA
    24V/250mA






KEYTEK Electromagnetic Lock Bracket

Code: PA4701


FEATURES:

  • ZL Bracket for Inward Door
  • For use with Keytek Electromagnetic Locks 280kg
  • Made of High Strength Aluminum
  • Special Aluminum, Firm and Durable
  • Special Design, Suitable with all kinds of Doors
  • The Best Choice of Access Control





KEYTEK Electromagnetic Lock 500kg

Code: PA4702


FEATURES:

  • Suitable for wooden, glass, metal and fire proof doors
  • LED indicates door status
  • Armature plate size: 185 (L) X 60 (W) X 13 (H)
  • Holding force: 500kgs
  • Voltage: 12 / 24 V DC ± 10%
  • Current draw:
    12V/420mA
    24V/210mA





KEYTEK Electromagnetic Lock Bracket

Code: PA4703


FEATURES:

  • ZL Bracket for Inward Door
  • For use with Keytek Electromagnetic Locks 500kg
  • Made of High Strength Aluminum
  • Special Aluminum, Firm and Durable
  • Special Design, Suitable with all kinds of Doors
  • The Best Choice of Access Control





Strike Lock Single Pulse Flush Mount

Code: PA4704


FEATURES:

  • Single Pulse: When the button has been pushed the gate opens and remains open
  • Continuous Pulse: The button must held in to allow the gate to be opened. The gate will remain locked if the gate is not opened.





Strike Lock Single Pulse

Code: PA4705


FEATURES:

  • Single pulse electric strike: When the button has been pushed the gate opens and remains open
  • Adjustable backset





  GO BACK

Do not hesitate contact the Spectrum Security Products Sales Team for more information or to place your order.

 


Best Prices | Largest Selection | Finest Technology | Communications Leaders