PRODUCT DESCRIPTION
tele-FLEX is an advanced telemetry device providing connectivity to intelligent devices with serial ports and protocols. The device communicates via any media at any speed from radio to TCP/IP. tele-FLEX connects SCADA and HOST software to local or remote field devices.
FEATURES:
Din-Rail Industrial Packaging
- The complete tele-FLEX Node is DIN-rail mounted, to conform to the industrial standard most commonly used. The overall size of a tele-FLEX is approximately 150mm deep, 130mm high and two widths of either 180mm or 3200mm wide
Modular Construction
- A tele-FLEX Node is made up of individual cards that plug into a backplane that is in turn carried by aluminium DIN-rail holder. The individual cards are selected from an array of CPU's, PSU's serial cards, dedicated communications cards (TCI/IP, Device-Net, etc.) and 110 cards. Each card is 35mm wide.
Processor
- The CPU is Intel-based. This allows a wide variety of operating systems and software to be accommodated. Applications developed under C+ or C++ can be loaded directly on the tele-FLEX Node. This creates an extremely powerful platform 'on the floor' and 'in the field'.
Applications
- Electrical Networks
- Water and Sewage Networks
- Industrial Process Control/Mines
- Wide area systems
- Available tele-FLEX Cards
PSU Card
- input +8 to 30 VDC
- output +5 VDC @ 3A
- high efficiency switch mode design
CPU Card
- 386 SX 40mHZ
- 2 x RS232 Serial ports
- Diagnostics, general
Multi-Serial Card
- 4 x RS232 ports
- Fully independent
- 300 to 115k baud
Ethernet Card
- 10 Base T
- 10 Mbps
- Supports TCP/IP
Backplane 5 Way
DIN 32 Card
- 32 x Optically Isolated Inputs
DOUT 32 Card
- 32 x Open Collector Inputs
AIN 8/12 Card
- 8 x 12 Bit Analog 4-20mA Inputs